Built to Last: The Ultimate Wood Framing Checklist

By -

FRAMING QUALITY CHECKLIST



WALL FRAMING

1) Are the walls square? (check 3-4-5 method)

2) Are the walls plumb?

3) Are all the studs 16” on center or per print?

4) Are all the studs crowned consistently?

5) Are the walls free of twisted or bowed studs?

6) Are all the corners framed correctly? Build California Corners to get maximum insulation on exterior walls. 

7) Is the corner bracing or plywood present and installed properly?

 (nailing 45 degrees)

8) Is the installed sheathing stapled or nailed correctly?

9) Is the Exterior sheathing free from holes or

damage?

10) Do you have the correct dimension lumber on all the headers? Recess the headers for insulation on the exterior walls.

11) Do the splices in the top plates occur over studs?

12) Are the wall-top plate tie-ins evident, and correct?

13) Is the rough doorway measurements correct?

14) Rough window measurements, correct?


15) Verify bridging, blocks and bracing are provided as required and in suitable manner.

16) Verify fire blocking is provided as required

17) Are the Medicine cabinets framed per print?

18) Are the Attic access openings framed correctly?

19) Verify that the plywood or OSB sheathing is applied as specified: Grade, dimension, staggering, nailing, blocking, and no overdriven nails. 





20) Verify that the sheathing paper air infiltration vapor barrier is provided as required and installed properly and not damaged. 



Are the trusses spaced 2' on center or per the drawings?

ROOF FRAMING

Are the truss clips evident on the center and on the exterior walls?

Is the gable end truss bracing evident and correct?

Is the roof framing installed with metal "H" clips?


MISCELLANEOUS FRAMING

Is the site free of trash and framing debris?

Are there no signs of floor squeaks?

Is there no evident floor spring or bounce?


Shettig Construction Management provides Professional Construction Management services from the inception of your project through completion. www.shettig.com

mshettig@gmail.com













08

Comments

Post a Comment

Popular Posts

Build Faster, Smarter: Is the Design-Build Method Right for Your Project?

By -
Image
The Design-build method on your construction project versus the traditional Design, bid, build method. Project: Huntsman Chemical Computer Building Addition, Conroe, Texas  I met Huntsman in mid-August and reviewed their completed drawings for the project.   They required that their project be complete by December 1 st . Their design showed a 44’ x 40’ painted block addition, one story along with bar joists and a structural steel deck with poured concrete and a gable steel frame roof with metal roof panels.                                  Bar joists with metal deck and poured concrete deck. METAL BAR JOISTS SCHEDULE PROBLEM Bar joists require a 10–12-week delivery after the shop drawing review. This puts the delivery in early December. Their design is a 7-month schedule project, not the 3 months that they desired. REDESIGN OF THE PROJECT TO A STRUCTURAL STEEL FRAMING I discussed with them t...
Read more

Building Smarter: The Power of Pre-Construction in Design-Build

By -
Image
The Design-Build Method is an alternative in the building of your project.  In the Design-Build method, you will start an immediate collaboration with your Design-Build consultant (DBC) The Pre-Construction activities are the first part of the Design-Build Method. The pre-construction phase starts with a Preliminary drawing or sketch that can be generated by the Design-Build consultant or the Owner. Develop Estimates and Budgets From there, you want to establish the Budget of the project from the design stage through the construction stage. The DBC team will start with square foot estimates. As more detailed drawings are completed by the  D BC, they will develop a more detailed construction estimate.   Incorporate Value Engineering into your  project. At this point, the DBC will develop some Value engineering suggestions and Options for the building. The Value Engineering suggestions would look at alternate materials, methods, and components in the design that can ad...
Read more

Beyond the Dig: A Quality Control Checklist for Site Excavation

By -
Image
Quality Control Checklist for Site Excavation   1. Review your job survey information, monuments, and property corner stakes. Check to see if your property corners are set by your survey crew. Identify where your survey crew established a Benchmark with an identifying  elevation.                   Your survey crew may need to bring in an elevation mark from an offsite benchmark. They then can set a benchmark stake in a power pole or tree.  All your excavation elevations will then be determined from the benchmark.  Existing Underground and Overhead Utilities 2. Verify the existing utility lines are located, staked, and protected, and observe conditions of the uncovered lines.  3. Verify that the utility companies have been notified.  4. Verify that all underground lines have been identified. Have you called Miss Utility or 811 in Texas? Contact them at least 48 hours before you begin any excavation. Have...
Read more