How to soundproof commercial space

By -

Commercial lease space renovation.

Project: Image Studios, Beauty salon with individual rooms.

5,295 Sf Retail layout proposed.




Image Studios -individual Beauty Salons


The \\\\
Wall Assembly




This wall assembly's Sound Transmission Class (STC) would be around 35-45.
The client stated that the units would have hair dryers and people talking loudly.
The decibels for a hair dryer is between 70 and 90 decibels. 
Loud taking would be between 60 and 70 decibels. 
The decibels transmitting through the wall assembly would be 55 on the high side. The sound similar to 55 decibels would be a normal conversation between two people.
So the client asked for an alternate wall assembly to reduce the sound.

Proposed Wall Assembly

We proposed a wall assembly that includes one layer of 5/8" GOLD BOND SOUNDBREAK XP on each side of the metal studs and resilient channels with 3-inch insulation. This STC rating is between 55 and 60.



Proposed wall assembly between the units


This assembly would then add 30 points to the original STC rating. 
And the decibels would then be 30 through the wall assembly.
30 Decibels would be a whisper at 5 feet. 

Rockwool insulation would add further sound absorption than the standard 3-inch fiberglass insulation. Rockwool is made from mineral wool and is denser. It adds about 10 points to the STC rating. 



Seal the wall board's bottom and top with a Green Glue Sealant. 

Cover the electrical outlets in the walls with Quiet Putty.

The enhanced wall assembly should provide a much quieter environment suitable for a beauty salon with individual rooms.

 Shettig Construction Management provides Professional Design-Build Construction Management services from the inception of your project through completion. www.shettig.com mshettig@gmail.com


















Comments

Post a Comment

Popular Posts

When is it good to use the Design-Build Method on Construction Projects?

By -
Image
The Design-build method on your construction project versus the traditional Design, bid, build method. Project: Huntsman Chemical Computer Building Addition, Conroe, Texas  I met Huntsman in mid-August and reviewed their completed drawings for the project.   They required that their project be complete by December 1 st . Their design showed a 44’ x 40’ painted block addition, one story along with bar joists and a structural steel deck with poured concrete and a gable steel frame roof with metal roof panels.                                  Bar joists with metal deck and poured concrete deck. METAL BAR JOISTS SCHEDULE PROBLEM Bar joists require a 10–12-week delivery after the shop drawing review. This puts the delivery in early December. Their design is a 7-month schedule project, not the 3 months that they desired. REDESIGN OF THE PROJECT TO A STRUCTURAL STEEL FRAMING I discussed with them t...
Read more

Pre-Construction in the Design Build Method of Construction

By -
Image
The Design-Build Method is an alternative in the building of your project.  In the Design-Build method, you will start an immediate collaboration with your Design-Build consultant (DBC) The Pre-Construction activities are the first part of the Design-Build Method. The pre-construction phase starts with a Preliminary drawing or sketch that can be generated by the Design-Build consultant or the Owner. Develop Estimates and Budgets From there, you want to establish the Budget of the project from the design stage through the construction stage. The DBC team will start with square foot estimates. As more detailed drawings are completed by the  D BC, they will develop a more detailed construction estimate.   Incorporate Value Engineering into your  project. At this point, the DBC will develop some Value engineering suggestions and Options for the building. The Value Engineering suggestions would look at alternate materials, methods, and components in the design that can ad...
Read more

Notices of Nonperformance to a Trade Contractor on a construction project

By -
Image
  Bridgewater College Dormitory Project Let me give you an example of an underperforming contractor from one of my past projects. I was involved in the building a $2.7 million Bridgewater Dormitory on the Campus of Bridgewater University in Bridgewater, Virginia. The Structure is 3 stories with a basement. Bridgewater Dormitory Liquidated Damage Project This was a liquidated damage clause project. The project had to be completed before the school year started in late August. Liquidated Damages clause means that if we go over the allotted time for the project then we would be charged a specific amount for each day that we were over the time limit. So,  the overall schedule of this project was very critical to the completion of the project. The critical path of this project was the construction of the exterior masonry work which included the brick and the Capstone on the top of the building. Every Trade Contractor is tied to the overall schedule of the project and the completi...
Read more